20mm Hubcentric Wheel Spacers For Honda & Acura 5x114.3 64.1mm CB 12X1.5

FEATURE:

Machined Finish using Forged 6061 T6 Aerospace Aluminum.

Please take proper measurements to ensure that by adding the spacer, the wheel/tire won't hit the fender or other part.

Hub Centric Adapters= No vibration/wheel wobble at high speeds. Perfect adapter for your Truck/SUV's

Avoid using an impact wrench improper usage may cause damage to components.

Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.

Make Sure You Get 5-7 Turns Before Tightening.

WARNING:

The included lug nuts extend past the face of the spacers.

IT IS REQUIRED that the back of your wheels have small cavities (at least 2" width and 1/4" deep) in the mounting pad for installation of these spacers.

These cavities are NEEDED so that the lug nuts and wheel studs can sit in this pocket.

Verify this before purchasing.

NOTICE:

Bolt pattern conversion adapter (Lug centric) This spacer set includes open end lug nuts to secure the spacers onto your factory hubs

Your Factory wheel studs may extend past the surface of the wheel spacers.

In this case you will need to:

1. Shorten the factory studs

2. The wheels need to have the open slots (cavities) between mounting holes.

3. Purchase a set of shorter studs and replace them with the factory studs.

INCLUDE:

4 pcs. Hardware included.

Instruction included.

Installation should only be performed by a trained professional.

Fitments: